Details
Nitrip DSE5110 Generator Electronic Controller Module Control Panel LCD Display

132 x 64 pixel LCD display, easy to read data.
Accurately display time and record time.
Multiple start and stop cycles can be preset.
Maintenance cycle reminder function can be preset.
Remote monitoring through the network (with DSE855).
Specification:
Material: Plastic
Weight: 837g/29.5oz  
Model: DSE5110
Power supply: DC 8~35V continuous
Start relay output:16AmpDC system DC voltage
Fuel relay output: 16Amp DC system DC voltage
Auxiliary relay output: 5Amp DC system DC voltage
Operating temperature range: -30 ~ +70C
Charging failure/excitation range: 0V~35V
Maximum operating current: 425(12V); 215MA (24V)
Starting voltage drop: when the voltage provided before starting is not less than 10V and the voltage recovery voltage reaches 5V, the control system can be ensured to maintain normal after 50ms of 0V voltage. There is no need to add a built-in battery.
DSE 5110 controller display parameters:
Generator phase voltage L1-N, L2-N, L3-N;
Generator line voltage L1-L2, L2-L3, L3-L1;
Generator current L1, L2, L3;
Generator frequency Hz;
Generator speeds RPM;
Engine Oil Pressure (PSI & Bar);
Engine water temperature (℃ & ° F);
Battery Voltage
Unit operating time;
DSE5110 controller alarm/ stop protection:
Underspeeds/ overspeeds, alarm/ stop;
Battery charging failure, alarm;
Emergency stop;stop;
Low oil pressure, alarm/ stop;
High water temperature, alarm/ stop;
Start failure, alarm;
Speeds signal loss, stop;
Package List:
1 x Generator Controller