Details
Electric DIY Reciprocating Actuator Cycle Linear Motion Actuator Motor with Speed Controller and Adjustable Switching for Shale Shaker,Door Opened,DIY Design (Stroke 30/50/70mm)

【Type】: Reciprocating Cycle Linear Motion Actuator Motor with Switching Power Supply&PWM Speed Controller.
【Voltage】: 12V/24V(optional), Speed: 4-470RPM(optional), Stroke: 70mm in default, 30/50mm can be adjusted easily.
【Material】:Made of Aluminum alloy, very sturdy construction inside and outside. The outside shell is well build and has excellent access to mounting screws.
【Application】:Widely use for Shale shaker, Vibrating screen, Spraying Machine, Pellet machine, Particle-making Experiment, Lifespan lab testing and so on.
【Package Listing】: 1pcs x Reciprocating Cycle Linear Actuator Motor+1pcs Stroke adjusted spanner+1pcs Switching Power Supply+1pcs PWM Speed Controller+wiring diagram.

Product Description:

-Rated Voltage: 12/24V(optional)

-No-Load Speed: 4-470RPM(optional)

-Stroke: 70mm Stroke will be fulfilled by default, Other Stroke(30mm,50mm) can be adjusted by yourself. 

-Widely use for Spraying Machine, Pellet machine, Particle-making Experiment, Lifespan lab testin and so on.

Features:

-This Linkage Mechanism is an automatic constantly reciprocating linear actuator motor, which frequency is Variable.

-This machine output in an axle, the run speed on axis is Non-uniform. If require speed uniform please don't bid.

-The reciprocate speed of machine can be controlled via PWM controller, the adjusted speed range is 0-self Speed, for example: 35rpm→0-Max 35rpm.

-The speed faster, the torque smaller, the noise louder. If require quietly, please be careful before bid.

-Linear motion part is consist of sliding linear ball bearing and steel axle. Axle need adds lubricating oil at regular intervals, in order to limited axle temperature less than 90 degrees, and oil wetness.

-Due to rotating lump is affected by gravity, the machine go and back speed is different.

Warning: 

1.Speed higher than 100rpm has very small force, the load larger then maximum force will break gearbox. 

2.Clear all barriers before operating the motor, even use your hand holding the shaft may break the motor. 

3.Please do accord to our advices for avoid unnecessary trouble!!!! 

4.Many customers have already broken the gears inside without proper operation, it causes much trouble.